GSO ISO/ASTM 51275:2021
Gulf Standard
Current Edition
·
Approved on
01 July 2021
·
Practice for use of a radiochromic film dosimetry system
GSO ISO/ASTM 51275:2021 Files
No files are available for this standard right now!
You can buy this standard from any member store
GSO ISO/ASTM 51275:2021 Scope
ISO/ASTM 51275:2013 is a practice for using radiochromic film dosimetry systems to measure absorbed dose in materials irradiated by photons or electrons in terms of absorbed dose to water.
Radiochromic film dosimetry systems are generally used as routine dosimetry systems.
The radiochromic film dosimeter is classified as a Type II dosimeter on the basis of the complex effect of influence quantities.
ISO/ASTM 51275:2013 is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ASTM E2628 for a radiochromic film dosimetry system. It is intended to be read in conjunction with ASTM E2628.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
GSO OIML R121:2007
OIML R 121:1996
Gulf Standard
The Scale of Relative Humidity of Air
Certified Against Saturated Salt Solutions
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
Recently Published from Metrology Sector
GSO ISO 12999-2:2024
ISO 12999-2:2020
Gulf Standard
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
GSO ISO 3864-2:2024
ISO 3864-2:2016
Gulf Standard
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
GSO ISO 14405-2:2024
ISO 14405-2:2018
Gulf Standard
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes
GSO ASTM E2847:2024
ASTM E2847:21
Gulf Standard
Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers